PDF문서(붙임3) sounding_rocket.pdf

닫기

background image

 

 

 

Announcement of Opportunity (AO) 

for Sounding Rockets 

A platform for your experiments 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indian Space Research Organisation 

Bangalore- 560 231 

 

 

 

 


background image

Page 2 of 8 

 

 

Announcement of Opportunity (AO) to national and international science 

community for Scientific Experiments using Sounding Rockets 

 

Indian Space Research Organisation (ISRO) of Department of Space (DOS), 
Government  of  India  solicits  proposals  in  response  to  this 

‘Announcement of 

Opportunity

’ for scientific payloads on its Sounding Rockets. 

ISRO is conducting Sounding Rocket launches periodically from its launching 
station at Thumba (TERLS 

– Thumba Equatorial Rocket Launching Station), a 

place  near  southern  tip  of  India  very  close  to  Earth’s  magnetic  equator  for 
atmospheric studies by launching probes to reach high altitude regions, which 
are inaccessible by balloons and satellites. More than 3500 Sounding Rocket 
launches have been successfully carried out by ISRO since 1963 with several 
scientific experiments with national and international participation. The TERLS 
Range is dedicated to the United Nations since 1968 and all member countries 
of the UN are welcome to use this facility for scientific research. 

TERLS  being  an  ideal  location  close  to  equator  and  one  of  the  very  few 
locations  in  the  world  having  capability  to  launch  Sounding  Rockets,  several 
research  projects  can  be  undertaken  by  using  data  from  atmospheric  and 
ionospheric  probes.  ISRO  is  offering  its  Sounding  Rockets  to  carry  scientific 
payloads for conducting experiments in 60 to 110 km region of the Atmosphere 
from its launch station at Thumba.  

Research Avenues 

  Aerosol experiments 
  Middle atmospheric winds, temperature and composition 
  Meteor smoke particle detection 
  Ionospheric electron density, irregularities and ion composition   
  Plasma, solar and astrophysics 
  Airglow and electro glows of outer planets 
  Plasma bubble studies 
  Radio propagation studies 
  Vapor / Tri Methyl Aluminum (TMA) trail studies 

 
The  above  mentioned  research  avenues  are  suggestive  but  not  exhaustive. 
Proposals  with  innovative  ideas  in  the  realms  of  atmospheric  and  space 
sciences, astronomy and astrophysics are solicited. 

 


background image

Page 3 of 8 

 

Sounding Rocket’s capabilities 

The  payload  of  a  Sounding  Rocket  consists  of  nose  cone,  payload  cylinder, 
ejection and / or separation mechanism, mounting decks, avionics systems and 
scientific instrument. The capability of Rohini (RH) series of Sounding Rockets 
are given below: 

Table 1

: Sounding Rocket’s capabilities 

Rocket 

Instrument 

mass and 

Altitude 

(Nominal) 

Payload 

Envelope* 

Power** 

Total 

Flight 

Duration 

(Nominal) 

RH 200 

 

5 kg, 60 km 

115 mm 

diameter x 

100 mm 

28 W@ 28 

250 s 

RH 300 

MkII 

 

20 kg, 110 km 

280 mm 

diameter x 

500 mm 

80 W @ 28 

320 s 

* Instrument volume with supporting avionics within payload volume  
** Power availability will be finalized based on the requirements of the scientific 
payloads 

Several payload deployment mechanisms, including nosecone ejection, boom 
deployment,  door  ejection  and  chemical  release  are  available.  The  launch 
station has S-Band Telemetry Station and C-Band & S-Band tracking Radars 
with Real Time Data Processing and data uplink system. However, the vehicle 
configuration  can  be  fine-tuned  based  on  the  requirements  of  the  scientific 
instrument. Currently, there are no provisions for recovering the payload.  

Purpose of this AO 

Proposals are solicited from National and International Scientific Community for 
innovative  payloads  for  scientific  experiments  to  study  the  middle  and  upper 
atmospheric regions.  

This AO for Sounding Rocket Experiments is open to scientists from member 
nations of the United Nations. 

 

 


background image

Page 4 of 8 

 

The Proposals 

Each  proposal  shall  clearly  identify  a  Principal  Investigator  (PI)  and  a  Lead 
Funding  Agency  (LFA)  for  the  proposed  scientific  instrument.  The  proposals 
shall clearly spell out the experiments and the extent of participation from ISRO 
for integration of the scientific instrument to the sounding rocket.  

 

The  proposers  are  expected  to  be  currently  involved  in  atmospheric  or 
Ionospheric  studies  /  the  development  of  science  instruments  /  willing  to 
develop scientific experiments and have access to associated facilities for test 
and instrument calibration.  The Principal Investigator of the proposal should be 
capable  of  (i)  providing  necessary  details  of  the  payload  and  its  mission 
objectives  and  (ii)  assembling  a  capable  payload  team  and  lead  the  team  to 
deliver a flight-qualified instrument. 

There could be limited opportunities for collaborating with teams in India based 
on  mutual  interest.  The  proposers  are  strongly  encouraged  for  sharing  of 
science data, interpretation and publications.  

All  proposals  should  be  submitted  through  the  respective  space 
agencies/Institutions/Research Laboratories and must be signed by an official 
authorised  to  certify,  support  and  sponsor  of  the  investigation  as  well  as  the 
management 

and 

financial 

aspects, 

on 

behalf 

of 

the 

space 

agency/Institution/Research Laboratories. 

 

The Proposal in both 

‘word’ and ‘pdf’ formats are to be submitted by post and 

email to: 

Director 

Space Science Programme Office, 

ISRO HQ, Antariksh Bhavan, 

New BEL Road, 

Bangalore-560 231 

Email: sr-ao@isro.gov.in 

The  confirmation  upon  the  receipt  of  the  proposal  will  be  sent  by  e-mail.  
Questions and clarifications, if any, may be send to the address above. 

The format for preparation of proposal is given in Annexure-I and the guidelines 
for development of instrument/payload is given in Annexure-II. 

 


background image

Page 5 of 8 

 

Selection process 

ISRO will constitute 

a ‘Selection Committee’ to screen the proposals and select 

them based on scientific benefits and technical content. Proposers who satisfy 
the  eligibility  criteria  and  whose  proposal  is  recommended  for  further 
consideration by the Selection Committee, will be intimated by email. 

 

Special Notes 

1. 

There will be no exchange of funds between ISRO and the Proposer. 

2. 

The launch schedule of selected instrument/payloads will be intimated to 
the proposers by ISRO. 

3. 

For details on (1) Guidelines for development of instrument/ payload and  
(2) Proposal preparation format please visit www.isro.gov.in 

4. 

Additional  changes  /  modifications  (if  any)  in  the  proposal  submission 
process (prior to submission deadline)  will be made  visible on the ISRO 
website. Proposing teams are expected to regularly check ISRO website 
(www.isro.gov.in) to additional details and updates. 

5. 

ISRO reserves the right to select or not to select any scientific instrument/ 
payload under this program and shall not be held liable. 

Last Date 

The last date for receiving the proposal is 31 December, 2019. 

 

 

 

 


background image

Page 6 of 8 

 

Annexure-I 

Proposal Preparation Format 

Cover Page should include the following: 

  Complete Title of the Proposal 
  Signature,  Name  and  address  of  Principal  Investigator  including  e-

mail, telephone and fax numbers 

  Name of Co-PIs, their address, e-mails etc. 
  Name of the country 

2. 

Executive Summary of the proposal (~Two A4 size pages in 12 point font 
size) 

(A brief description of the proposal stating the broad scientific objectives 
and  specific  aims  of  the  proposed  work.  It  should  include  a  concise 
description  of  scientific  instrument/payload  design  and  methods  for 
realising the hardware and software components) 

3. 

Science objectives including statement of hypothesis and how it will be 
addressed 

4. 

Expected outcome of the experiment 

5. 

Basic  concept  and  description  of  the  scientific  instrument/payload 
instrumentation  (include  line  diagrams  or  schematic)  with  details  on 
measurement procedure. 

6. 

Description  of  heritage  and  past  experience  in  scientific  instrument 
/payload development, if any 

7. 

Broad  specifications  of  the  payload/experiment  including  dimensions, 
volume,  weight,  power,  parameters  to  be  measured  (including 
measurement accuracies), data rates etc. 

8. 

Anticipated  new  technology  development  to  realise  the  scientific 
instrument /payload and back up strategies in the event of non-availability 
of the expected technology 

9. 

Need  for  any  laboratory  research  or  ground  based,  air  borne  or  other 
activities for the development of the instrument and its operation during 
the mission 

10. 

Design  approach  and  specifications,  development  process,  test, 
evaluation and calibration procedures 

11. 

Development  strategy  i.e.,  stages  of  laboratory  model,  engineering 
model, flight model etc. 


background image

Page 7 of 8 

 

12. 

Performance  characteristics  of  the  integrated  scientific  instrument 
/payload in terms of its fulfilling the proposed scientific objectives 

13. 

Plans for data processing, management and archival 

14. 

Description of required post-launch ground operation support 

15. 

Description of scientific instrument/payload interfaces with drawings 

16.   Proposed  ejection  mode  of  scientific  instrument/payload  /  dispensing 

system / spin requirements, if any 

17. 

Time schedules and critical path 

18. 

Procedure to monitor and review the progress of the development as per 
schedule and the quality assurance aspects 

19. 

Mode  of  participation  in  the  final  integration,  testing,  calibration  and 
checkout 

20.  Complete  list  of  names,  with  affiliation  and  e-mail  addresses  of  the  Co-

Investigators with specification of their expertise and roles in the scientific 
instrument /Payload development 

 

 


background image

Page 8 of 8 

 

Annexure II 

Guidelines for development of instrument/ payload 

1  Payload  to  be  configured  as  a  functionally  standalone  system.  Mass  & 

dimensions  to  be  limited  to  the  values  given  in  Table  1.  Any  waiver  for 
mechanical  interface/  mass  to  be  obtained  from  ISRO  prior  to  design 
finalisation. 

2.  Payload  should  be  able  to  operate  using  28V  power  bus  (RAW  power) 

provided from the Rocket power pack. 

3.  RF  payload  frequency/  power  &  sensitivity  to  be  finalised  after  payload 

interference study with the existing RF elements in the Rocket. 

4.  D-Type/ Circular MIL grade connectors to be used for electrical interface. 

5.  Electrical interface & mechanical interface will be made available by ISRO 

3 months prior to the targeted launch date, to initiate interface preparation 
at the launch vehicle side. Further changes in the interface details are not 
allowed.  

8. Dummy mass/ balancing with identical mass and footprint are to be made 

available by PI in case of non-readiness of the system (after the realisation 
of vehicle interfaces) for launch.  

9.  Payloads to be qualified / acceptance tested to the environmental test levels 

specified for Rohini Sounding Rockets. 

10. MOU to be signed between ISRO HQ and payload agencies.