KARI PROPRIETARY
Request For Proposal
for
Hydraulic bearing for slip table
maintenance
October 2016
Space Test Division
Korea Aerospace Research Institute
169-84 Gwahangno, Yuseong-gu, Daejeon, 305-806, KOREA
Phone : 82(42)860-2562, Fax : 82(42)860-2234
KARI PROPRIETARY
Request For Proposal
for
Hydraulic bearing for slip table maintenance
IMPORTANT
1. This RFP should be kept in confidentiality and should neither
be copied nor distributed to the third parties.
2. The questions and opinions on this RFP can be asked or
suggested to Korea Aerospace Research Institute before
submission of the proposal.
3. This RFP shall be legal bind after the contract is awarded
unless the bidder explicitly expresses the differences from the
RFP in the compliance sheet.
October 2016
Space Test Division
Korea Aerospace Research Institute
169-84 Gwahangno, Yuseong-gu
DAEJEON, 34133 KOREA
Phone : 82(42)860-2562, FAX : 82(42)860-2234
e-mail :acoust@kari.re.kr
2016. 10
1
Space Test Division
Table of Contents
I.
OVERVIEW ........................................................................................................................ 2
1. WORK DESCRIPTION ........................................................................................................... 2
2. DELIVERABLES .................................................................................................................. 2
3. WARRANTY ....................................................................................................................... 2
II.
TECHNICAL REQUIREMENTS .................................................................................. 2
1. TOTAL SYSTEM CONFIGURATION ........................................................................................ 3
2. TECHNICAL REQUIREMENTS ............................................................................................... 3
2016. 10
2
Space Test Division
I. OVERVIEW
1. Work description
The system hardware shall be manufactured to satisfy the hydraulic bearing performance described
in this RFP. All manufacturing operations shall be planned in co-ordination with inspections and tests.
Contractor shall supply the technical verification of bearing component to show the meet the
performance requirement.
Contract shall supply the dimensional report on bearings component and show the compatibility with
KARI slip table.
2. Deliverables
The hardware deliveries shall include, as a minimum, the following:
Item
No.
Part name
Qty
Description
1
Z bearing spare part
1
-
Z hydraulic bearing
-
300mm x 300mm x 106.5 mm
2
YZ bearing spare part
1
-
YZ hydraulic bearing
-
700mm x 370mm x 106.5 mm
3
Remote control panel
1
-
Schneider PLC box
-
400mm x 300mm x 200mm
3. Warranty
3.1
The system shall be warranted for a duration of 1 years after delivery.
3.2
The warranty covers the replacement of faulty parts, the labor required for repair, traveling
cost, living fees and all associated necessary costs.
II. Technical Requirements
2016. 10
3
Space Test Division
1.
Total System Configuration
This document covers the technical requirements applicable to maintenance parts for KARI slip
table system
Figure 1 3m-slip table system of KARI
2.
Technical Requirements
The work scope for procurement is
-
To supply hydraulic bearing
-
To supply remote control panel for the operation of hydraulic pump
-
To supply technical requirement verification
2.1
List of Maintenance Parts
The supplied maintenance part shall have the following requirement as minimum:
-
Z hydraulic bearing
2016. 10
4
Space Test Division
-
Z hydraulic bearing
-
Remote control panel : 1 EA
Schneider PLC box(400mm x 300mm x 200mm)
Touch screen of 3.5 inch with emergency stop switch
Start & Stop hydraulic pump with touch screen
All the default information shall be indicated on screen of remote control panel